Wireless radar detector. transverse this fantastic detector in a false ceiling so that it is not seen. Thanks to its radar signal can install it not visible anywhere. Works behind mirrors, glass and inside ligthing.

SILICONE end cap to connect LED strips for 10-12mm PCB. Resists temperatures from -55°C to 160°C. Aging resistance and weather resistance. Precision-manufactured using high-quality silicone, these caps are designed to withstand the elements and shine in any outdoor environment. The silicone not only provides exceptional protection against wear and weather but also ensures a hermetic seal to keep your LED strip in perfect condition if you apply our special Kafuter adhesive.

Infrared surface detector Slim with high sensitivity Use the local source of activation when it enters the detection zone. Adjustable time and brightness, with detector twilight e incorporates a timer of at least 5 seconds to 7 minutes. Maximum range of detection 360 ° and a distance of 6 meters.

Motion detector ideal for boxes of registration or wall with an angle of 160 ° range. Is designed to offer one reduced consumption or LED, has an IP 20 so it is for indoor use. It has a maximum of 600w incandescent and 200w led, isperfect for step spaces, corridors, bathrooms...

Discover the revolutionary Connector Strip with 4 Pressure Terminals for quick and secure electrical connection! Designed to simplify your electrical projects, this strip provides an efficient and reliable solution for your connection needs. With its 4 pressure terminals system, this strip allows you to make electrical connections quickly and effortlessly. The Connector Strip with 4 Pressure Terminals is versatile and adapts to a wide range of electrical applications.

With our soft orange filter you can lower the Kelvin degrees of your luminaire by about 1000K -1500K, depending on the degree of color. For example; if you put it on a 6000k luminaire a filter layer will convert it to 4500k. If you add 2 layers of soft orange filter you will transform it into 3000K, if you add 3 layers you will get 2200K. It cannot be installed in luminaires that exceed 122 cm. It has the relevant approvals. (205)

AVAILABLE IN MORE COLORS

Transparent solderless quick connector for non-waterproof IP20 COB and SMD strips with 10mm PCB. Our IP20 quick connector allows connections to be made on LED strips without the need for soldering by simply tightening the clips on the side of the connector. Super easy to fit. As it is transparent, the joints are not visible.

The 8mm and 10mm connectors are sold in packs of 10. 

1 unit = 10 conectores

Transparent solderless quick connector for non-waterproof IP20 COB and SMD strips with 10mm PCB. Our IP20 quick connector allows connections to be made on LED strips without the need for soldering by simply tightening the clips on the side of the connector. Super easy to fit. As it is transparent, the joints are not visible.

The 8mm and 10mm connectors are sold in packs of 10. 

1 unit = 10 conectores

Discover the Pack of 2 L-Connectors for COB and SMD LED Strips, perfect for easily connecting 8mm and 10mm strips at a 90° angle – no soldering required. Its IP65 water-resistant design ensures a safe, durable, and professional connection, ideal for indoor or covered outdoor use.

???? Important: Not suitable for waterproof LED strips.

Perfect for clean, continuous corners with no light gaps in profiles, ceilings, or furniture – offering a quick, aesthetic, and high-quality installation.

The 8mm and 10mm quick connectors are sold in packs of 2. 

1 unit = 2 connectors

The Photoelectric sensor is for indoor installation with IP20 protection. This indoor twilight sensor allows luminaires to be switched on/off depending on the ambient conditions. The protection available is IP20. It supports a load of up to 10 amps.

The series - PROFESSIONAL - of our photocontrollers is applicable to control the on / off of public professional lighting, outdoor garden lighting, outdoor building lighting, according to the level of natural ambient lighting.

Our pink filters for LED Lighting are composed of a dichroic filter which is made up of a transparent sheet. This pink transparent sheet has a reflective coating on one of its surfaces that reflects the light to be filtered. (035)

AVAILABLE IN MORE COLORS

Ultracompact LED motion detector with only 2 cm diameter and a nominal power of 100 W. Its discreet design makes it virtually invisible, offering time and light sensitivity adjustment, a detection range of up to 8 meters, and full 360º coverage, outperforming conventional detectors.

Solderless transparent connector for non-waterproof IP20 COB and SMD strips with 10mm. Our IP20 quick connector allows connections to be made on LED strips without the need for soldering by simply tightening the clips on the side of the connector. Super easy to fit. As it is transparent, the joints are not visible.

Do you want to save time and money?: The 2-way quick connector - PCT-212 - for electrical cable is used to make quick and safe connections in all types of lighting and also in both temporary and permanent electrical installations. With these fast and safe connectors, great cost savings are achieved in assembly.

You want to save time and money: The quick connector 2 inputs - KV221-415 - for electrical cable is used for fast and safe connections in all types of lighting and also in temporary and permanent electrical installations. With these quick and safe connectors, you achieve great cost savings in assembly.